1" Jewelry Circles/ Discs Kiln Casting Mold

*If using COE90, adjust this temperature to 900

Refer to the table below for a suggested Tack Fire schedule for COE96 glass:
(If fusing to a Tack Fire, we recommend using Powder and Fine frit, and filling uniformly 1/4" full)

*If using COE90, adjust this temperature to 900

What glass separators can I use?

• We recommend using ZYP spray for the best results with our molds.
• Other boron nitride sprays work well too.
• The brand Slides Hi Temp separator will not work with our molds.
• If you use Hotline Primo Primer Kiln Wash, make sure it is COMPLETELY dry before putting any glass in or on the mold, otherwise the glass can stick.
• These recommendations are directly from the manufacturer.